Cooktop Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Shop By Brand Shop By Part Type

Popular Cooktop Parts

Drip Bowl - 8" – Part Number: 316048413
Drip Bowl - 8"
$12.57
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX437595
Manufacturer Part Number
316048413
This OEM drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. Drip bowls catch any spills, and are a quick, easy, and cheap way to improve your cooktop aesthetic. While the replacement may be visually different from the original, it will fit your appliance. If your drip bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. This drip bowl is sold individually, so if you would like to replace all 4 drip bowls on your appliance you will need to account for this. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.
Fixes these symptoms

Installation Instructions

Mike from Buffalo, NY
Replaced accessories for top of electric range
I was simple. Using this site online afforded me the opportunity to conveniently replace accessories that were in bad shape. I will always use this site for my self-installation needs in the future. Mike , NY Read more...
Chrome Drip Bowl - 6" – Part Number: 316048414
Chrome Drip Bowl - 6"
$7.45
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX437596
Manufacturer Part Number
316048414
This drip bowl is an OEM approved replacement part designed for use with various electric ranges and cooktops. This part is located underneath the burner to contain any spills while cooking. It fits under 6-inch burner elements and has a diameter of approximately 8-inches. While the replacement may be visually different from the original, if you have used your correct model number to search, this will fit your appliance. Common reasons to replace this often neglected part is if it has become discolored, corroded, or otherwise damaged. Each drip bowl is sold individually. This is a good time to inspect all drip bowls on the appliance, if you would like to give your appliance a fresh look, keeping in mind that they may be different sizes and are sold separately. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.
Fixes these symptoms

Installation Instructions

Mike from Buffalo, NY
Replaced accessories for top of electric range
I was simple. Using this site online afforded me the opportunity to conveniently replace accessories that were in bad shape. I will always use this site for my self-installation needs in the future. Mike , NY Read more...
Watch the install video
Terminal Block Kit – Part Number: 5303935058
Terminal Block Kit
$16.19
In Stock
Fix Number
FIX470125
Manufacturer Part Number
5303935058
This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and wires. The purpose of this part is to connect the wire harness to the surface element, which allows for the burners to heat up. Some common issues that result from a damaged terminal block is that your element will not heat properly or not heat up at all, may cause burning smell, or make a buzzing noise. If you remove the element and the tips are black, that is a good sign there is a problem with the terminal block and it should be replaced. It may also be necessary to replace the burner elements as well, if the tips are badly damaged. This repair will require a pair of wire strippers, a #1 square head screwdriver, and a heat gun or hair dryer. If you are not comfortable with cutting, stripping, and reconnecting of wires you should contact a qualified professional to complete this repair. Please be sure to disconnect the power supply to your appliance before starting this repair. As this is a genuine OEM parts kit, it will be compatible with your appliance model.
Fixes these symptoms
  • Element will not heat
  • Oven not heating evenly
  • Will Not Start
  • See more...

Installation Instructions

SHIRLEY O from boxborough, MA
burner would not heat
removed burners, cut wires to each burner, installed new wires from terminal block kit. reinstalled surface element. Followed directions from video located at site of the ordered items Read more...
Watch the install video
Chrome Drip Bowl - 8 inch – Part Number: WPW10196405
Chrome Drip Bowl - 8 inch
$7.66
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11750107
Manufacturer Part Number
WPW10196405
This chrome drip bowl is an OEM approved replacement part sourced directly from the manufacturer. Drip bowls are a part for your cooktop, positioned underneath the burner to catch spills. This drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. It is common for the manufacturer to switch up designs, so it may not match your current part, however searching using the correct model number will ensure proper fit and function. Drips bowls are prone to wear and tear and can be a fire hazard if not replaced when needed. It is also a quick, easy, and cheap way to give your appliance a fresh new look. Each drip bowl is sold individually, so if you are interested in replacing your other drips bowls, they need to be ordered separately. This is also an opportune time to inspect the terminals for corrosion or damage, and the condition of the burner. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place. Give your new drip bowl a regular cleaning with warm water and soap to help it last as long as possible.
Fixes these symptoms

Installation Instructions

Henry from St Louis, MO
Replace old drip Bowls
Remove heating elements, remove old drip bowl, install new drip bowls replace heating elements. Read more...
Drip Bowl - 6 Inch – Part Number: WB31T10010
Drip Bowl - 6 Inch
$18.20
In Stock
Fix Number
FIX244394
Manufacturer Part Number
WB31T10010
This is a genuine replacement drip bowl, that measures 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in diameter in total to its outer edge. If this part is worn, damaged or beyond cleaning, this replacement part can provide an inexpensive and simple facelift to your range. This part is sold individually, but this might be a good opportunity to inspect the other drip bowls on your appliance and replace at the same time. This is a quick and easy repair that does not require any tools. Start by removing the element from the stove top using your hands. Insert the new bowl, making sure it is aligned to where the element is plugged in and reassemble the element.

Installation Instructions

Jeffrey from SEATTLE, WA
Bake element replacement
1. Turn of over power at the breaker.
2. Remove bake element cover. There's 2 quarter inch nuts.
3. Disconnect old element. For me there was not much play in the wires so when I disconnected the old element I lost the wire in the insulation. If this happened you can remove the central plate cover on the back of the oven and you can easily find the wires again.
4. Connect the replacement element.
5. Screw the bake element cover back in.
6. Turn power back on. Read more...
Burner Bowl - 6 Inch – Part Number: WB31K10265
Burner Bowl - 6 Inch
$10.09
In Stock
Fix Number
FIX8754845
Manufacturer Part Number
WB31K10265
This 6" chrome drip bowl is sold individually.

Installation Instructions

Robert from Snoqualmie, WA
The old drip pans had burned in residue and could not be cleaned.
I simply removed the burners and drip pans and replaced the drip pans with the replacement parts. The replacement parts fit better than the original parts. The burner did not fit well in the old drip pans and the pans did not sit level on the burners.The new drip pans are perfect even to the slots to accommodate one of the legs on the burner. Read more...
Chrome Burner Bowl - 8 Inch – Part Number: WB31K10266
Chrome Burner Bowl - 8 Inch
$13.96
In Stock
Fix Number
FIX8754846
Manufacturer Part Number
WB31K10266

Installation Instructions

Robert from Snoqualmie, WA
The old drip pans had burned in residue and could not be cleaned.
I simply removed the burners and drip pans and replaced the drip pans with the replacement parts. The replacement parts fit better than the original parts. The burner did not fit well in the old drip pans and the pans did not sit level on the burners.The new drip pans are perfect even to the slots to accommodate one of the legs on the burner. Read more...
Watch the install video
Drip Bowl - 6 Inch – Part Number: W10196406RW
Drip Bowl - 6 Inch
$10.09
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX2366565
Manufacturer Part Number
W10196406RW
The drip bowl is used for electric ranges or cooktops with the coiled style burners, to catch any drips, spills, or crumbs that may occur while cooking. If your bowls have become discolored, corroded, difficult to clean, or otherwise damaged it may be time to replace them. This repair is easy and does not require any tools to complete the job. Ensure that all burners are turned off and cool to the touch before starting. First you need to lift up and disconnect the burner from the socket. While you have the burner out, it is a good time to check it for any signs of damage. Look at the terminals for any signs of arcing or burning. If you notice this, you will want to replace both the element and the receptacle it plugs into. Remove the old drip bowl by pulling it out. Then insert the new one by lining up the small hole on the side with the element block. Ensure that it is siting flat and then plug the element back into the socket. Please note that the manufacturer has substituted this part, and it no longer has a solid bottom. It is not recommended to cover the hole with products like aluminum foil, as it can trap heat or melt, becoming a fire hazard. As it is an OEM part, it ensures it will fit your model. The drip bowls are sold individually, chrome in color and about 8 inches in diameter, made to fit under a 6 inch burner element.
Fixes these symptoms

Installation Instructions

chris from ABERDEEN, SD
Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together. Read more...
Watch the install video
Knob - Chrome – Part Number: WP7737P245-60
Knob - Chrome
$16.74
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11744713
Manufacturer Part Number
WP7737P245-60
This is an OEM chrome control knob, measuring approximately 1-1/2 inches in diameter. This control knob either controls the speed of the cooktop fan or the heat of the burner. This knob is compatible with D-shaped shafts. This is a simple and tool-free repair, just pull the knob off the shaft and place the new one into place. This is a good opportunity to inspect all the knobs on your appliance to maintain a consistent appearance. Each knob is sold separately.
Fixes these symptoms
  • Element will not heat
  • Touchpad does not respond
  • Will Not Start
  • See more...

Installation Instructions

David from Edina, MN
Knob support was cracked due to age
Piece of cake to replace Read more...
Watch the install video
Drip Bowl - 8 Inch – Part Number: W10196405RW
Drip Bowl - 8 Inch
$10.87
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX2366563
Manufacturer Part Number
W10196405RW
The drip bowl is found underneath the burner element of ranges with a rolled terminal style plug-in surface element. The purpose of the bowl is to catch any drips or spills that may occur while cooking. If the drip bowl has become damaged or tarnished beyond cleaning, it may be time for a replacement. This is a genuine OEM part that is 8-inches in size and is sold individually. When you replace the drip bowl, you will need to remove the element from the terminal block. At this time, you should also inspect the elements for any signs of damage or corrosion and replace them if necessary.
Fixes these symptoms

Installation Instructions

chris from ABERDEEN, SD
Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together. Read more...

Cooktop Brands

Related Cooktop Parts

Popular Cooktop Models

View More
+