OEM Uni Cooktop Parts & Accessories

Drip Bowl - 8"

$12.57

Fix Number: FIX437595
Manufacturer Part Number: 316048413

This OEM drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. Drip bowls catch any spills, and are a quick, easy, and cheap way to improve your cooktop aesthetic. While the replacement may be visually different from the original, it will fit your appliance. If your drip bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. This drip bowl is sold individually, so if you would like to replace all 4 drip bowls on your appliance you will need to account for this. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Mike from Buffalo, NY

Replaced accessories for top of electric range

I was simple. Using this site online afforded me the opportunity to conveniently replace accessories that were in bad shape. I will always use this site for my self-installation needs in the future. Mike , NY Read more...

Chrome Drip Bowl - 6"

$7.45

★★★★★

2 Reviews

Fix Number: FIX437596
Manufacturer Part Number: 316048414

This drip bowl is an OEM approved replacement part designed for use with various electric ranges and cooktops. This part is located underneath the burner to contain any spills while cooking. It fits under 6-inch burner elements and has a diameter of approximately 8-inches. While the replacement may be visually different from the original, if you have used your correct model number to search, this will fit your appliance. Common reasons to replace this often neglected part is if it has become discolored, corroded, or otherwise damaged. Each drip bowl is sold individually. This is a good time to inspect all drip bowls on the appliance, if you would like to give your appliance a fresh look, keeping in mind that they may be different sizes and are sold separately. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Mike from Buffalo, NY

Replaced accessories for top of electric range

I was simple. Using this site online afforded me the opportunity to conveniently replace accessories that were in bad shape. I will always use this site for my self-installation needs in the future. Mike , NY Read more...

Watch the install video

Terminal Block Kit

$16.19

Fix Number: FIX470125
Manufacturer Part Number: 5303935058

This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and wires. The purpose of this part is to connect the wire harness to the surface element, which allows for the burners to heat up. Some common issues that result from a damaged terminal block is that your element will not heat properly or not heat up at all, may cause burning smell, or make a buzzing noise. If you remove the element and the tips are black, that is a good sign there is a problem with the terminal block and it should be replaced. It may also be necessary to replace the burner elements as well, if the tips are badly damaged. This repair will require a pair of wire strippers, a #1 square head screwdriver, and a heat gun or hair dryer. If you are not comfortable with cutting, stripping, and reconnecting of wires you should contact a qualified professional to complete this repair. Please be sure to disconnect the power supply to your appliance before starting this repair. As this is a genuine OEM parts kit, it will be compatible with your appliance model.

Fixes these symptoms

Element will not heat
Oven not heating evenly
Will Not Start
See more...

Installation Instructions

SHIRLEY O from boxborough, MA

burner would not heat

removed burners, cut wires to each burner, installed new wires from terminal block kit. reinstalled surface element. Followed directions from video located at site of the ordered items Read more...

Watch the install video

CAP

$24.33

Fix Number: FIX11775705
Manufacturer Part Number: 5304508442

Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills. The surface burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner head from cooking spills. Without the cap you can have a burning gas torch. If your cap is missing or is discolored, replacing this part can solve the issue. This part comes in the color black. Remember to unplug your range from the power source and allow surface to cool before installing this part. Refer to the manual provided by the manufacturer for further installation instructions.

Watch the install video

CAP

$30.05

Fix Number: FIX11775704
Manufacturer Part Number: 5304508441

Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.

Watch the install video

CAP

$37.85

Fix Number: FIX11775719
Manufacturer Part Number: 5304508468

Burner Switch Kit

$40.11

Fix Number: FIX470145
Manufacturer Part Number: 5303935086

This switch controls the stove top surface burner.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Phil from Elkton, OR

8 inch surface element melted at elbow to terminal block - shot out a 6 inch flame.

Note: This is the first time I've ever tried fixing a stove. First, I ordered a new element. Took a minute to install, but it didn't solve the problem. I ordered a terminal block kit and switch kit. Replaced the terminal block. Took about 10 minutes. Only problem was the shrink sleeves melted. Electrician's tape remedied the problem. Tested the element again. It still didn't work. Following instructions provided, replaced the old switch with the new universal switch. First unplugged stove. Removed upper back panel. Took a closeup photo of switch connections, in case I messed up. Removed old switch, leaving all wires connected. Per instructions, mounted new switch and fitted dial to proper length - took about two minutes. Permanently mounted new switch. New switch wire terminals were not in the same location as on the old switch. No matter, both old and new switch terminal designations are clearly marked. Transferred wires from old terminals, one at a time, and connected to corresponding terminal on new switch. Plugged in stove. Turned on the new switch. Element worked fine. Tested the rest of the stove, just to make sure I didn't mess anything up. Everything worked. Replaced back panel. Cleaned up areas on the stove that are hard to reach while stove is in place. Slid stove back in place. Works like a champ. Read more...

Surface Burner Switch - 8 Inch

$71.76

Fix Number: FIX2342881
Manufacturer Part Number: 318293825

This switch controls the large surface burner. As per manufacture the original screws will damage new switch. New screws are needed.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Anthony from Stoneham, MA

Burner would not shut off

The replacement switch was a different configuration. I had to read the numbers on the old switch and compare them to the new switch.Removed 5 wires from old switch and put on new switch one at a time I used the same screws from the old switch to install the new switch no problem.Just make sure you have a magnetic screwdriver or one with clips to hold the screws.I lost six screws under the stove top. Read more...