LG Parts

LG Appliance Parts

Popular LG Parts

Dryer Lint Filter
$54.23
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX3531962
Manufacturer Part Number
ADQ56656401
The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Special details: When replacing lint screen ADQ56656401 you may need to also replace lint screen housing MCK49049101 and lint screen guide MEA49050001 to prevent items from catching on the lint screen, depending on your model.
Fixes these symptoms

Installation Instructions

Frank from Eau Claire, WI
Damaged lint dryer and guide, kid didn't push down lint filter and nap sack rope caught it yanked apart assembly.
Removed screws, took a whopping 5 minutes, including unpacking box assembly of screw driver. Grab a vacuum, good time to clean out inside of dryer while torn apart. EZ repair. Read more...
★★★★★
★★★★★
4 Reviews
Fix Number
FIX3579318
Manufacturer Part Number
4681EA2001T
This is a drain pump motor assembly for washers. This OEM part is responsible for removing water from the washer during the drain part of the cycle. When this part is clogged, damaged or defective it can cause the washer to not drain properly. Keep in mind that the pump casing is sold separately. This repair is rated medium-difficulty and can vary depending on the model. For this repair you will need a Philips screwdriver, a small flat blade screwdriver, needle nose pliers, and slip joint pliers. Do not forget to disconnect the power before you begin this repair. In general, this repair can be started by removing the top of the washer followed by the front panel. Moving down the front of the appliance, remove the door, latch, tub gasket, and drainer cover. The drain hoses and clip will need to be disconnected from under the drain assembly. To install the new pump motor, reassemble parts in the reverse order. We recommend taking photos while disassembling and keeping screws and parts neatly organized.
Fixes these symptoms
  • Draining Issues
  • Engine runs but does not pump water
  • Leaking
  • See more...

Installation Instructions

Michael from Oconomowoc, WI
Water was not draining from wash tub. A code "0E" was showing on the display
Your Youtube video describes the repair perfectly. I'll add: Be careful when removing and placing the control panel on top of the Washer. Once removed, my panel had a wire harness with a zip tied. I cut the zip tie to allow enough slack to lay the panel on top of the washer. No need to disconnect any wires (I put a new zip tie on upon reassembly.) Be careful when removing the retention ring around the Rubber Boot, takes a little finesse, but not too difficult, Don't use a sharp object as you don't want to cut the boot. Make sure the boot is properly seated and the retention ring is securely in place upon reassembly. When removing the old pump my model has the pump held in place with 2x screws (easy to get at from the front) and also slides onto a plastic foot that has a "tab" that needs to be depressed to slide the motor out. You can't see the foot or tab from the front of the washer, as its hidden behind the pump, but fish around with your hand and you'll feel the tab..hold it down and the pump will slide towards the back of the Washer. Thanks, $60 bucks and couple hours was way better than a new $700 Washer. Read more...
Dryer Lint Filter Assembly
$35.48
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX3527575
Manufacturer Part Number
5231EL1001C
A fully functional lint filter is an essential part for your dryer. It helps to trap lint and other debris from your laundry and prevents it from entering the ducts. An excess buildup of lint can be dangerous as it becomes a fire hazard. Regular cleaning of the filter can help to prevent this from happening. If your lint filter becomes damaged, replacing it is an easy repair that does not require any tools. Simply remove the broken filter from your filter and put the new one in its place.
Fixes these symptoms

Installation Instructions

Janice from Park City, UT
Broken lint catcher.
Remove the old one and put in the new one. Read more...
HOLDER
$8.79
In Stock
Fix Number
FIX12081829
Manufacturer Part Number
MEG64438801
Door Basket
$37.21
In Stock
Fix Number
FIX7786020
Manufacturer Part Number
AAP73631502
This door bin is for refrigerators. Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
Dryer Lint Filter
$50.03
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX3527578
Manufacturer Part Number
5231EL1003B
If the lint filter in your dryer has become damaged, this is a genuine OEM replacement filter. It is important to always run the dryer with the filter in place, as it traps lint and other debris from entering the dryer vents. Without the filter, the vents can become clogged with lint which can prevent your laundry from drying properly along with being a fire hazard. Replacing this part is an easy repair. Simply remove the old filter, and insert the new one in its place. Always be sure to clean the filter between each load of laundry.
Fixes these symptoms

Installation Instructions

Jeanne from Cincinnati, OH
Needed new lint filter.
Take out the old filter and slip in the new filter. Read more...
FILTER,GREASE
$12.24
In Stock
Fix Number
FIX12713651
Manufacturer Part Number
5230W1A012E
Sold individually.

Installation Instructions

GRACE from CAMARILLO, CA
All greasy filter
I replace Charcoal filter by removing 4 screws on top microwave grille, remove it and i slid out the old filter and place the new one. The grease filters it took less than one minute to replace both. Read more...
ROLLER ASSEMBLY
$9.30
In Stock
Fix Number
FIX12075858
Manufacturer Part Number
4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.
BASKET,DOOR
$46.89
On Order
Fix Number
FIX12715906
Manufacturer Part Number
MAN63948502
Lint Screen Housing
$34.89
In Stock
Fix Number
FIX3534930
Manufacturer Part Number
MCK49049101
This is an authentic OEM housing for the lint filter in your dryer. This plastic cover helps to protect the actual lint filter, as that part is more delicate. It is important to have a functioning lint trap in your dryer, as it helps to keep debris out of the dryer vents. This in turn allows your clothes to dryer faster, and also prevents fire hazards.
Fixes these symptoms

Installation Instructions

Frank from Eau Claire, WI
Damaged lint dryer and guide, kid didn't push down lint filter and nap sack rope caught it yanked apart assembly.
Removed screws, took a whopping 5 minutes, including unpacking box assembly of screw driver. Grab a vacuum, good time to clean out inside of dryer while torn apart. EZ repair. Read more...

LG Appliance Types

Popular LG Models