Part Location Diagram of 285664 Whirlpool Drain Hose with Clamp
See part 5 in the diagram
Replacing your Whirlpool Washer Drain Hose with Clamp
( Grid squares measure 1x1 inch )

Drain Hose with Clamp 285664

Rated by 6 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$48.51
In Stock
Fix Number:
FIX334596
Manufacturer #:
285664
Manufactured by:
Whirlpool

Product Description

Used to drain water.

Videos For installing this part.

Replacing your Drain Hose with Clamp

Replacing your Drain Hose with Clamp

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.8 / 5.0, 6 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
michael from LAKE WORTH, FL
Parts Used:
285664
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
drain hose was linking
simply loosen the clamp and remove old drain hose. Slide the clamp on the new hose and attach to washer and tighten clamp. All don e
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anita from Schenectady, NY
Parts Used:
285664
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Drain hose was leaving badly.
Part ordered on Thurs. evening. Arrived Sat at noon. Removed old drain hose with rags and a flute plate to catch excess water left in machine. Dried area where water leaked. Placed end of new hose into outlet on washing machine. NewClamp was TOO BIG. Removed new hose and clamp and replaced new clamp with old clamp which was undamaged an d fit properly. Ran 2 rinse only tests to determine that the hose was properly placed and not leaking. Hose was a Perfect fit. Again clamp was wrong and trying to make it fit would have damaged spring hold.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
david from Pearisburg, VA
Parts Used:
285664
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
bought used, drain hose was incomplete, purchased hose from parts select, but had wrong clamp, ok I had one on hand.
clamp on new hose.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lynn G from Altadena, CA
Parts Used:
WP3363892, 285664
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
My washer was leaking water so badly, it was draining to the down stairs apartment!!
My Washer is a Washer & Dryer Combo!! I First Disconnected the Power and taped the power cord firmly to the top of washer!! Then i shut off the hot & cold water valves and disconnected the hoses from behind the washer and drained hoses to plastic bucket!! Next i Turned off gas Valve, and disconnected gas hose from the valve!! I then pull ed washer out from in back of the wall, and disconnected the dryer vent hose from in back of the dryer!! I then pulled my washer out to an open space and carefully laid it down on its side!! I then Checked out the leaky pump to make sure it matched the replacement pump!! All good, it was a go!! :)) Using a pair of channel lock pliers, i squeezed the hose clamps and moved back just far enough to remove the hoses from the pump!! Then with a screw driver, i unbuckled the pump hold down straps and removed the leaky pump from motor shaft!! My pump removed very easily without use of a screwdriver!! I then lined up new pump with motor shaft, and made sure that the three points lined up right!! After i new that the new pump was aligned properly, I First Secured the 2 Pump Hold Down straps and made sure pump was secured to the motor shaft!! The i put back on the suction and the discharge hoses and secured the clamps to the pump!! At this point my pump repair surgery was complete!! I then stood the machine upright, reconnected everything i described i had either disconnected or unplugged and ran the washer through a Test Cycle!! All good, No Leaks, and back to normal living!! :))
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Rye Brook, NY
Parts Used:
285664
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Leaky drainge hose
Super Easy, ordered the parts, which arrived in 24hours, used a pliers to loosen clamp, slid on the hose, done in five minutes
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Virginia from La Canada, CA
Parts Used:
285664
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Old Hose Had Holes and was leaking
Replaced the old hose by releasing the clamp at the base of the washer (in Back), Connected new Hose in reverse and viola! done.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX334596
Manufacturer Part Number: 285664
Brand
Model Number
Description
Kenmore
10682872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
110088732791
Washer Dryer Combo
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11013202200
Washer
Kenmore
11013212200
Washer
Kenmore
11014102300
Washer
Kenmore
11014112300
Washer
Kenmore
11014202300
Washer
Kenmore
11014212200
Washer
Kenmore
11014222300
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11015942400
Washer
Kenmore
11015942401
Washer
Kenmore
11015944400
Washer
Kenmore
11015944401
Washer
Kenmore
11015952400
Washer