Tiller Hardware

Popular Tiller Hardware

Fuel Line Grommet
$4.99
In Stock
Fix Number
FIX8859978
Manufacturer Part Number
13211546730
This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the fuel line and the fuel tank connect. A worn grommet is a safety hazard because it will cause fuel to leak from the tank. We recommend when replacing it to also replace the fuel line. Before starting this repair make sure to drain the fuel from the tank, and remove the spark plug.
Nut, Hex, Flangelock
$4.99
In Stock
Fix Number
FIX9022497
Manufacturer Part Number
532409149
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most models require three. For this repair you will need a wrench set.
Clip
$5.19
In Stock
Fix Number
FIX9261895
Manufacturer Part Number
13201309820
Wing Bolt
$5.19
In Stock
Fix Number
FIX8917824
Manufacturer Part Number
21041752730
Nut-6
$4.99
In Stock
Fix Number
FIX9162880
Manufacturer Part Number
90050200006
Nut-Hex 5/16-18
$5.99
In Stock
Fix Number
FIX9999668
Manufacturer Part Number
703409
This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on appliance. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine, be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.
Key-Flywheel
$4.99
In Stock
Fix Number
FIX8925657
Manufacturer Part Number
222698S
Nut 5
$4.99
In Stock
Fix Number
FIX9148697
Manufacturer Part Number
90050000005
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation instructions and nut location in a specific tool. This lock nut is used to resist loosening when threaded onto a bolt. *Please note: this part is sold individually. The measurements are: 5mm.
Nut-Centerlock
$7.19
In Stock
Fix Number
FIX10000167
Manufacturer Part Number
703893
Cotter Pin
$4.99
In Stock
Fix Number
FIX9999599
Manufacturer Part Number
703312

Tiller Hardware Brands