Thermador Parts

★★★★★

★★★★★

3 Reviews

Fix Number

FIX8727387

Manufacturer Part Number

00611475

This part includes one grey plastic wheel with the attachment, designed for your lower dishrack. It allows you to slide the dishrack in and out smoothly. If one of these wheels is missing or damaged, it can make it difficult to slide the rack in and out and can make it impossible to close the dishwasher door. Replacing this part is simple, snap it off the dishrack, and snap the new one into place. Note that each wheel is sold separately, so order accordingly.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX884734

Manufacturer Part Number

8009

This is a genuine OEM 40-Watt replacement light bulb that is compatible with various types of appliances. It has a frosted glass bulb with a standard metal socket base, making it easy to screw and unscrew by hand to replace. It is designed to tolerate extreme temperatures, which is why it is commonly used to light the inside of refrigerators and ovens. Depending on the appliance and location of the bulb, disconnecting the power is recommended. This bulb is sold individually.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX12728638

Manufacturer Part Number

W11384469

Door switch turns the light off when you close the door.

Fix Number

FIX8727423

Manufacturer Part Number

00611666

This is a genuine OEM replacement rack roller wheel for the top rack of your dishwasher. If one of your wheels has become damaged, it can make your rack unbalanced and difficult to pull in and out. This can result in dishes not being properly cleaned, or potentially getting damaged. The wheel kit is sold individually and comes with one axle and one roller. Replacing a damaged wheel is an easy repair that does not require any tools, the new part simply clips into place on the rack.

★★★★★

★★★★★

1 Review

Fix Number

FIX16746057

Manufacturer Part Number

10023852

★★★★★

★★★★★

6 Reviews

Fix Number

FIX358591

Manufacturer Part Number

4317943

The ice maker works by filling with water from the inlet valve, freezing it into cubes, and then dispensing the cubes into the storage bucket. It will then refill with water and repeat this process until the ice storage bucket is full. If yours is not making ice or it is leaking, it may be time to replace the ice maker. Depending on usage and water quality, these should be replaced every three to ten years. Please note that this kit does not come with a new shut off arm (also known as a bail arm). You will need to reuse the arm from your old ice maker, or you can purchase a new one separately. This genuine OEM parts kit includes the replacement ice maker, wire harnesses (flat and round plug versions), and the mounting hardware. The wire harness from your old ice maker can also be reused if you choose. This model is approximately 11x5 inches in size, made of plastic and metal, and is black and silver in color. This model does not work with refrigerators that have the ice auger on the door, it is meant to sit in the upper left hand of the freezer. Please ensure that you disconnect the power and water supply before beginning this repair. ***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.

Fix Number

FIX12730058

Manufacturer Part Number

20000533

Fix Number

FIX11722132

Manufacturer Part Number

EDR5RXD1

This ice and water filter is NSF-certified to filter out sediment, chlorine, and lead to improve the taste and odor of your water. It is recommended to change the filter every six month, or after 200 gallons of water have passed through. Replacing the filter is a simple job that does not require any tools, just be sure to shut off the ice maker beforehand. The filter is located below the fridge door in the kick plate grill, behind the round cap. Rotate the cap a quarter turn counterclockwise, so it goes from a horizontal to a vertical position. Pull the filter out giving it a wiggle if necessary to get it loose. Slide the holder cap off the old filter and place onto the new one. Remove the protective cover from the end of the filter and insert it into place, with the holder cap in the vertical position. This time make a quarter turn in the clockwise direction, so the holder is back in a horizontal position. This is a genuine OEM part that measures approximately 2.5 inches in diameter and 10.5 inches long.

Fix Number

FIX8727471

Manufacturer Part Number

00611981

This part is a replacement tine row clip for your dishwasher. The tine row clip is adjustable, and it fits onto your dishrack to holds the tines into place. If your dishrack tine rows will not stay in position, you could have one or more broken tine clips. To replace a tine row clip, simply snap the old tine row clip out, and replace it with the new clip. This part is made of gray plastic and is approximately one inch long and half an inch wide. This part is sold individually, so it is a good idea to check all of your tine row clips to determine if more than one are broken.

Fix Number

FIX8728568

Manufacturer Part Number

00619985

This is an authentic metal mounting bracket for a dishwasher, sold individually. The purpose of this part is to secure the top of the dishwasher to the bottom of your counter. If there is no way to mount the dishwasher to the countertop itself, this bracket can also be used to mount a dishwasher onto the side of the cabinet. Over time this part will wear or damage, and this will cause the dishwasher to lose stability in the counter. Please note that the dishwasher will need to be moved out of the cabinet to install this part.