Part Location Diagram of 316075103 Frigidaire Oven Bake Element
See part 5 in the diagram
Replacing your Frigidaire Range Oven Bake Element
( Grid squares measure 1x1 inch )

Oven Bake Element 316075103

★★★★★
★★★★★
10 Reviews

Rated by 131 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$47.55
In Stock
Fix Number:
FIX438018
Manufacturer #:
316075103
Manufactured by:
Frigidaire

Product Description

This genuine OEM bake element is located on the bottom of the oven cavity to supply heat for baking. The approximate size is 19-1/2 inches wide by 18-1/2 inches long and has 3-1/2 inch inserts. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. Please remember to disconnect the power to your oven before you start your repair. Next, remove the 2 screws securing the old element, pull it out, and discard. Connect the new element prongs where the old element fit and screw it back in place. This is a very simple repair that anyone can do.

Videos For installing this part.

Replacing your Oven Bake Element

Replacing your Oven Bake Element

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Logan
April 14, 2022
oven will not heat
For model number t e o356 b f w 3
Fix.com logo
Hello Logan, thank you for writing. It is recommended to replace the Oven Bake Oven FIX438018. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

1 person found this helpful.

Was this helpful?
Thank you for voting!
JT
November 29, 2022
I REPLACED THE HEATING UNIT FOR THE BAKING PART OF THE OVEN AND IT DOES NOT HEAT WITH NEW UNIT INSTALLED. IS THERE A FUSE OR SOMETHING THAT MAY BE CAUSING IT TO NOT HEAT UP??
For model number FFEF3048LSN
Fix.com logo
Hi, thank you for reaching out. The issue is probably with the Temperature Sensor, part number FIX1528542. If it is not causing the issue, you need to replace the Control Board, part number FIX12114577, to fix the issue. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.

Was this helpful?
Thank you for voting!
Related Parts:
Tom
February 10, 2023
My Kenmore electric range oven heating elements won't work on both the bake and broil elements. Could it be something else and would it be worth fixing.
For model number 790.46784900
Fix.com logo
Hello Tom, thank you for your question. The part that operates both elements is the Timer FIX2379175. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
Related Parts:
Lauraine
October 30, 2023
My Kenmore oven heats but is not baking properly. If the recipe requires 375°, it must be increased to 385°. This started happening since last week. I bake a lot.
For model number 790.78303010
Fix.com logo
Hello Lauraine, thank you for contacting us. You may need to check the bake element. If it is not faulty, then you may need to replace the temperature sensor, part number FIX1528542, to fix the issue. Glad to be of assistance!

Was this helpful?
Thank you for voting!
Related Parts:
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.5 / 5.0, 131 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Werkheiser from Saylorsburg, PA
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Bake element broke
Extremely easy. I unscrewed two screws and pulled out old element and plugged in the new one. Pushed back in and screwed the screws back in. That's it
16 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
boulders apts from amherst, MA
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burnt out bake element
Removed 2 mounting bracket screws pulled element out from back of stove pulled terminals off removed then installed new one
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Pedro from DARTMOUTH, MA
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Heat element needed to be replaced
SHUT THE POWER! Unscrew the 2 bolts from the rear. Pull the wires from the existing element and pin them to the new element easy.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from PEMBROKE, MA
Parts Used:
316075103
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Wife complained that oven was taking an unusaully long time to heat for baking.
1. Removed two (2) small sheet metal screws that secured the heating element to the rear of the oven.
2. Slid element out about four inches (4").
3. Unplugged the two (2) spade connectors.
4. Removed old element.
5. Installed new element in reverse order.

Happy wife, happy life!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Portsmouth, NH
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Bake element burnt.
Very simple. Turn off breaker to range. Remove 2 (ea) #8 screws,pull element out, remove the 2 spade connectors. Install 2 spade connectors to new element, push into position, install 2(ea) #8 screws,turn breaker to range on & ops check; good to go.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eric from Kirkland, WA
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
oven element burned out
Simply unscrewed the two tabs at the back of the oven that are attached to the bottom burner element, pulled out the element which was attached to the wiring with quick clip connectors, detached the connectors and reattached the new element, and then screwed it back in. Turned on the oven and it worked like a charm.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from Spring Hill, FL
Parts Used:
316075103
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Element was burnt out
Turned power off to unit. Removed the 2 screws holding heating element on to back wall. Gently pulled element ends out of back wall exposing wire clips that make the connection. Pulled off clips, cleaned bottom of oven, put clips on new element, gently pushed wires back into unit, re-attached the screws. Turned power back on to unit. Ran it at 350 degrees for 10 minutes to burn off any chemicals from manufacturing and shipping.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from Footville, WI
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Bake element didn't heat.
1.Pull stove away from wall. 2.Unpug power cord 3.Using nutdriver, remove two screws holding element to oven wall. 4.Separate element from wiring by simply pulling the wires with "push- on" connections from element. 5.Reverse process to install new element.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
mark from Traverse City, MI
Parts Used:
316075103, 316490000
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
f10 when we used oven
pulled stove out, remove power cord from wall,remove back and replace parts .
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Diana from Corpus Christi, TX
Parts Used:
316075103
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Bake element not heating.
Instruction video very helpful but we did need to buy different terminals as the ones on our oven were a little different. after replacing the terminals everything else was just like the video.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating: (10 Reviews)
4.9
★★★★★
★★★★★
Filter By Rating:
  • 5
    9
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX438018
Manufacturer Part Number: 316075103
Brand
Model Number
Description
Frigidaire
00462048A
Range - Range
Frigidaire
00462048B
Range - Range
Frigidaire
00462048C
Range - Range
Frigidaire
00462048D
Range - Range
Frigidaire
00462048E
Range
Frigidaire
20462052A
Range - Range
Frigidaire
20462052B
Range - Range
Frigidaire
20462052C
Range - Range
Frigidaire
20462052D
Range
Frigidaire
20462052E
Range
Tappan
30TESKWED-04-23
Range - Electric
Tappan
30TESKWED-23
Range - Electric
Tappan
30TESKWED-23-02
Range - Electric
Tappan
30TESKWED-23-03
Range - Electric
Tappan
30TESKWED1
Range - Electric
Tappan
30TESKWED2
Range - Electric
Tappan
30TESKWED3
Range - Electric
Tappan
30TESKWED4
Range - Electric
Tappan
31-1049-00-01
Range - Electric
Tappan
31-1049-00-02
Range - Electric
Tappan
31-1049-00-03
Range - Electric
Tappan
31-1049-00-04
Range - Electric
Tappan
31-1049-00-05
Range - Electric
Tappan
31-1049-00-06
Range - Electric
Tappan
31-1049-23-01
Range - Electric
Tappan
31-1049-23-02
Range - Electric
Tappan
31-1049-23-03
Range - Electric
Tappan
31-1049-23-04
Range - Electric
Tappan
31-1049-23-05
Range - Electric
Tappan
31-1049-23-06
Range - Electric