OEM Delta Table Saw Parts & Accessories

Switch W/ Key

$41.51

Fix Number: FIX10325609
Manufacturer Part Number: 489105-00

This Switch is an OEM approved replacement part for various tools and models manufactured by Delta, Black and Decker, and Porter Cable. For full compatibility, please see the "Model Cross Reference List" below. This Switch has four terminals, a removable safety key, and a compact design for easy installation. The purpose of the switch is to turn the device on/off, as well as playing a role in electric breaking by momentarily reversing electrical polarity. Due to the mechanical internals of switches, they tend to degrade and wear out over time, making them a commonly replaced part in power tools. Common symptoms of a broken switch include: the device has completely stopped functioning, it will not turn on, and turning off intermittently during use. Each Switch is sold individually, and may also be referred to as a Rocker Switch.

Installation Instructions

keith from EMPORIA, KS

Power switch would not turn saw off

unplugged power cord.
removed the nut holding the power switch assembly on the saw.
removed 3 screws from the back cover.
removed the 2 white wires and 2 black wires from the switch terminal post. pay attention to wire color on each post.
removed old switch from the bracket by squeezing the sides of the old switch to remove the switch from the bracket.
inserted the new switch in place in the opening.
re attached the wires to the spade terminal on the switch using the 4 terminals. black on the 2 posts top and bottom on one side and the other side white on the top and bottom.
re attach the switch assembly to the table saw
test operation Read more...

Glide Pad

$4.99

Fix Number: FIX10321519
Manufacturer Part Number: 1350019S

Brush (Sold Individually)

$10.50

Fix Number: FIX10106168
Manufacturer Part Number: 1313113

This is a carbon brush set for your power tools, most commonly your planer jointer. Two of these brushes are needed for most power tools, and this purchase only includes one. If you are having troubles with electric braking, or motor functions, you should replace your carbon brushes. We recommend replacing both brushes together, to create an even wear. This is a part that is replaced often in power tools because of the constant friction during operation. When making this installation we recommend inspecting the armature for visible damage that could prove larger motor issues.

Installation Instructions

Dwayne from Millville, NJ

Broken belt (motor runs, blade didn't turn)

1) Watched YouTube video before ordering parts to confirm my problem and to get an overview of the repair.
2) found 7-step instruction in user manual - worked perfectly (Part# 901608 (014) downloaded PDF) on page 26
Turned saw over and layed on two 2x8s to protect spindle and it case I dropped the saw. Use a helper if you have one but I did not need one.
3) inspected motor brushes per user manual (had spares ready) 4-step instructions (two brushes) on page 25
4) used stiff brush to clean parts and screw shafts while saw was upside down
5) re-assembled, tested saw, double verified that blade tilt was still at Zero degrees when return to 0 and fense and blade were still parallel.

Cleaning and testing took as long as changing the belt and inspecting brushes. Read more...

Arbor Nut (Left Hand Thread)

$31.14

Fix Number: FIX10327830
Manufacturer Part Number: 902012009848S

This arbor nut fits a variety of lawn and gardening tools. It is a left handed thread, which means if spin it the opposite way of a regular nut, which helps keep the nut secure when operating. To find the location of the nut inside the tool during installation, refer to the diagram provided by the manufacturer.

3V-BLTS 4L 261/16

$22.70

Fix Number: FIX10325836
Manufacturer Part Number: 5140043-25

Blade Nut

$5.23

Fix Number: FIX10332257
Manufacturer Part Number: DPEC002962

Bearing

$51.91

Fix Number: FIX10315390
Manufacturer Part Number: 1086894S

This ball bearing fits a variety of lawn and gardening tools. The ball bearings prevent friction between rotating parts. The balls do this by bearing the load and spin and distributing the weight equally, while the minimal contact area of the balls reduce friction. This allows your tool to run easily. Ball bearings are a commonly replaced part because of the constant wear they experience. Tip: check your bearings and replace them periodically. *Please note: they are sold individually.

Brush

$20.77

Fix Number: FIX12021560
Manufacturer Part Number: 1348266

This is an OEM replacement carbon brush, sold individually. To ensure your motor is running smoothly and efficiently, it is advised to inspect the carbon brushes every few months, as they are prone to regular wear. The carbon brush has an important job of conducting electrical current, so if worn, your tool will not function as it should. If your tool is smoking or burn marks are present, it is advisable to also check the condition of the armature, as this could indicate more serious motor problems.