Miter Saw Parts

Brush and Lead

$8.95

Fix Number: FIX10181643
Manufacturer Part Number: 614367-00

This OEM brush is sold individually, however two are needed in most power tools, and should be replaced at the same time, even if only one is worn. If the motor of your power tool is running poorly, worn brushes are the likely cause. A brush that is worn out will often wear down near the wire lead and can become cracked, pitted, or burned. When replacing the carbon brushes, take this time to check the condition of the armature, if it appears damaged this can indicate more significant motor issues.

Watch the install video

Brush

$13.99

Fix Number: FIX10170261
Manufacturer Part Number: 381028-08

This carbon brush fits a variety of gardening and lawn tools. The brush is a common replacement part and can easily fix most motor malfunctions. This brush comes with a wire lead and a connection terminal. Inspect the wire lead for any damage and replace immediately if burns or cracks are noticed. Refer to the diagram provided by the manufacturer for installation instructions.

BRUSH BOX ASM

$4.99

Fix Number: FIX12522639
Manufacturer Part Number: N292059

Carbon Brush Set

$10.85

Fix Number: FIX10156641
Manufacturer Part Number: CB154

This motor brush set is for power tools. Motor brush set transfers electric current to the spinning armature in the motor. The set includes both motor brushes.

Brush and Spring

$8.86

★★★★★

1 Review

Fix Number: FIX10166057
Manufacturer Part Number: 145323-06

This carbon brush and spring kit includes a carbon brush, wire lead, and a spring. The parts fit a variety of tools such as saws. If you notice your motor is running poorly or is intermittent, then check the brush for damage, cracks, and burns. It is common to replace the brushes repeatedly as they easily wear off from friction and use. Tip: remember to inspect your armature for burns and cracks when replacing your carbon brushes. This will help identify larger motor problems. This part measures to 3/4 inches in length, 1/2 inches in width, and the 1/4 inches in thickness. Refer to the manual for installation instructions and a list of the parts included.

Watch the install video

Blade Adapter Ring

$4.99

★★★★★

2 Reviews

Fix Number: FIX10166690
Manufacturer Part Number: 152636-00

This is an authentic adapter ring used to mount the saw blade to your miter saw. It is sold as an individual part. Standard 12-inch saw blades have a 1-inch arbor hole, while most miter saw arbors are 5/8 of an inch. This adapter ring is placed on the blade hole and over the arbor so you can use a 12-inch blade. This part is prone to wear and tear, which will make the blade unbalanced, signalling that it should get replaced.

Bearing

$4.99

Fix Number: FIX10188435
Manufacturer Part Number: N110359

This authentic ball bearing is sold individually. It can be used in a variety of differently model types, such as miter saws, circular saws, table saws, and angle grinders. This ball bearing is sealed on both sides. Its job is to minimize friction between rotating parts. The armature rotates at a very fast rate, so after years of use, it is normal for the bearings to wear.

Watch the install video

Power Cord

$28.36

Fix Number: FIX10169913
Manufacturer Part Number: 330079-98

It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 10 Feet Long

Ball Bearing 6302V

$11.93

★★★★★

1 Review

Fix Number: FIX10188573
Manufacturer Part Number: N127530

This Ball Bearing is sealed on both sides. It is a genuine replacement part and is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Power Tool Power Cord

$23.43

★★★★★

1 Review

Fix Number: FIX10153842
Manufacturer Part Number: 664265-4

This power cord is for power tools. Unplug the power tool before installing this part. Wear work gloves to protect your hands.

Popular Miter Saw Parts

Miter Saw Brands

Related Miter Saw Parts

Popular Miter Saw Models

Miter Saw Parts

Start With Your Model Number

Popular Miter Saw Parts

Miter Saw Brands

Related Miter Saw Parts

Popular Miter Saw Models