Sander Grinder Parts

Sander Grinder Partsfor

Popular Sander Grinder Parts

Carbon Brush Assembly
$5.19
In Stock
Fix Number
FIX10122192
Manufacturer Part Number
22-18-0680
This carbon brush is used on a variety of cordless tools and appliances. *Please note: This part is sold individually. Carbon brushes are commonly replaced because they wear out easily with friction. If your brush is worn out it can cause disruption in the functioning of the motor and reduce electric braking. If you notice cracks, burns and other damage on wire lead, then it is best to replace it to restore the motor and its functions. Refer to the manual provided by the manufacturer for further installation instructions.
Flange Nut
$5.52
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX10131039
Manufacturer Part Number
44-40-0035
This is an authentic flange nut for multiple grinder models. The flange nut fits onto the spindle, followed by the grinding wheel. The flange is secured in place using a spanner wrench, which fits neatly into the holes of the flange nut. It measures approximately 5/8-inches and is sold individually.
Carbon Brush Set Cut-Off
$13.79
In Stock
Fix Number
FIX10416486
Manufacturer Part Number
316046900
Disk Flange
$4.99
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX10129924
Manufacturer Part Number
43-34-0036
This part includes one disk flange for a grinder. This disk flange is an OEM quality part, ensuring the perfect fit. The disc flange works with the nut to secure the grinding disk to your grinder. It is common for the hub to wear, which can lead to a wobbly grinding wheel. For this quick and easy repair, you will need a wrench to remove the nut and a screwdriver to help pry off the old disk flange.
Carbon Brush/Spring (2 Required)
$17.96
In Stock
Fix Number
FIX10122203
Manufacturer Part Number
22-18-0730
This is a carbon brush, used in a multiple different power tools. It is recommended to replace both carbon brushes at the same time even if only one appears worn. This part includes one manufacturer-approved carbon brush, so you may wish to order two. Carbon brushes are a very common replacement part and should be checked and replaced as part of your power tools regular maintenance. When inspecting the carbon brushes, it is also advisable to check the condition of the armature, especially if sparks were present.
Carbon Brush/Lead (Sold Individually)
$5.89
In Stock
Fix Number
FIX10122198
Manufacturer Part Number
22-18-0710
This carbon brush lead or also known as a carbon motor brush fits the following tools: angle grinders, nibbler and shears, sander polishers, and jig saws. This includes the brush and a wire lead attached. This is one of the most commonly replaced power tool components because the carbon brushes easily wear off with friction and use. If your brush is worn out it can cause intermittent motor function, reduction in electric braking, and in motor power. If you notice burns and cracks on the wire lead, then it is best to replace this part. Tip: when replacing your carbon brush, make sure to inspect your armature for damage as well, in case there are larger motor problems.
Cord Set
$20.72
In Stock
Fix Number
FIX17016229
Manufacturer Part Number
344492750
This is an OEM 16-gauge cord for double insulated tools. It is sold individually, and measures 9 feet long. It is a two-wire cord with two prongs and does not require a ground wire. If the cord is cracked or damaged in any way, it should be replaced right away to avoid shock.
Muffler Insert (Sold Individually)
$4.99
In Stock
Fix Number
FIX10338782
Manufacturer Part Number
56027
This is a muffler insert for a sander and it is sold as an individual item. It is sourced directly from the original manufacturer. It is located underneath the muffler cap, in the muffler body. The purpose of the muffler insert is to reduce the sound of air coming from the exhaust and to filter out leftover oil inside the tool. If it is clogged, this can slow down the tool significantly, and allow contaminants to make their way to the motor, which can cause further damage. It will become evident that a replacement is required when it has turned black in color.
Fix Number
FIX10122413
Manufacturer Part Number
22-22-1560
This carbon brush assembly includes the brush, holder, and spring. This part is approved by the manufacturer, ensuring quality performance and compatibility. A worn carbon brush is the most likely cause for a motor that is not performing properly or at all, which is why they are so important to keep well-maintained. For this quick and simple repair you may require a screwdriver and a set of pliers.
Cable Sleeve
$4.99
On Order
Fix Number
FIX10418940
Manufacturer Part Number
344100970
This is a cable sleeve for your power tools. It may also be known as a cord protector, and is designed to slide onto your cord and rest securely at the end. The firm rubber will protect the base of your cord and avoid pinching and bending. If wires are exposed it is considered a safety hazard.