OEM Milwaukee Impact Driver Parts & Accessories

Handle Assembly - Single Speed

$20.92

Fix Number: FIX17016953
Manufacturer Part Number: 31-44-2661

Handle Assembly - Single Speed

3/8" Friction Ring

$4.99

Fix Number: FIX11878410
Manufacturer Part Number: 44-90-1050

This is a metal friction ring, sold individually and used in impact wrenches as part of the anvil assembly. It measures roughly 3/8-Inches. When the socket is installed, the ring is compressed, and the tension that is created is what holds the socket securely in place. Over the lifetime of the tool, the ring can compress too small, and it will no longer fit properly in the socket, and will need to be replaced. For this repair you will need a pick to pry off the friction ring, a pair of needle nose pliers, retaining ring pliers, and a small screwdriver.

3/8" O-Ring

$4.99

Fix Number: FIX11877651
Manufacturer Part Number: 34-40-1885

This O-ring is attached to the anvil and backs up the tension ring. The O-ring minimizes how much the tension ring can compress when a socket is installed. O-rings are common wear parts that tend to harden and deteriorate over time due to their rubber material. A sign that this O-ring needs to be replaced is if the socket is no longer being held properly on the anvil. This manufacturer-approved part is sold individually.

Belt Clip Assembly.

$6.15

Fix Number: FIX10129406
Manufacturer Part Number: 42-70-2653

Ring Friction

$5.64

Fix Number: FIX11878417
Manufacturer Part Number: 44-90-4530

Detent Pin

$4.99

★★★★★

1 Review

Fix Number: FIX11878296
Manufacturer Part Number: 44-60-0597

This is a genuine detent pin, sold individually. The detent pin is for impact wrenches and is driven by the anvil detent spring (sold separately), which secures the driver socket of the wrench. This repair is considered easy by our customers and should take less than fifteen minutes to complete. You will need a screwdriver and a pair of pliers to get the job done.

1/8" Collet

$6.27

Fix Number: FIX10129511
Manufacturer Part Number: 42-77-0400

This is an authentically sourced collet for rotary tools. This collet is for using bits with 1/8-Inch arbors. Over time and heavy use, the collet will wear and will require replacing. You may need a collet nut wrench (sold separately) to remove the collet nut.

Machined Jaw Kit (Set Of 3)

$22.20

Fix Number: FIX17017029
Manufacturer Part Number: 30-55-0035

Machined Jaw Kit (Set Of 3)

Watch the install video

Brush Card Assembly

$15.14

Fix Number: FIX10120878
Manufacturer Part Number: 14-46-2012

This is a manufacturer-approved brush card assembly. The brush card is an easy way to service the brushes on your power tool. The assembly includes the brushes, the brush springs, holders, and the wire leads that go to the motor. This is a simple repair that will require you to release the spring tension on the brush and then secure the brush card in the appropriate position.

Spring

$4.99

Fix Number: FIX11877727
Manufacturer Part Number: 40-50-0925

Milwaukee Impact Driver Parts

Popular Milwaukee Impact Driver Parts

Milwaukee Impact Driver Appliance Types

Popular Milwaukee Impact Driver Models

Milwaukee Impact Driver Parts

Start With Your Model Number

Popular Milwaukee Impact Driver Parts

Milwaukee Impact Driver Appliance Types

Popular Milwaukee Impact Driver Models