Husky Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Husky Appliance Parts
Shop By Appliance Type

Popular Husky Parts

Shear Pin, .25 – Part Number: 738-04124A
Shear Pin, .25
$3.99
In Stock
Fix Number
FIX9110822
Manufacturer Part Number
738-04124A
Designed for use in MTD, Yard Machine, Troy-Bilt, Yard-Man, and Craftsman machines, this OEM approved Shear Pin fits a variety of models. For full compatibility, please see the "Model Cross Reference List" below. This is a shear pin for your lawn and garden equipment, most commonly your snow blower. It is designed to snap if your auger gets jammed or clogged, to protect your snow blower from further damage. Because this part is meant to snap at a certain point of pressure, it is a commonly replaced part in snow blowers. Consequently, we recommend keeping a spare on hand. This Shear Pin is approximately 1.75" long, and is sold individually.
Watch the install video
Mulching Blade – Part Number: 942-0741A
Mulching Blade
$31.74
In Stock
Fix Number
FIX9169783
Manufacturer Part Number
942-0741A
This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces along the edges of the blade. If installed correctly this part will keep the grass clipping under the deck longer, and re-cut them. The blade is 21 inches long, and sold individually.
Fixes these symptoms
Bow Tie Cotter Pin – Part Number: 714-04040
Bow Tie Cotter Pin
$3.99
In Stock
Fix Number
FIX9096195
Manufacturer Part Number
714-04040
This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.
Watch the install video
Drain Valve – Part Number: N286039
Drain Valve
$4.99
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX10049094
Manufacturer Part Number
N286039
This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, and this allows water to exit the tank. Water builds up if air is left in the tank for an extended period of time, and if left for too long, it can start to rust out the inside of the tank and the drain valve can become clogged with rust or start to corrode. You should be draining the tank each time you use your air compressor to stop this from happening. This is a very quick and simple repair. Use a wrench to remove the old drain valve, and thread the new one into place by hand.

Installation Instructions

Steven from SMITHS STA, AL
Wouldn't hold air in tank.
Took old drain valve out and replaced with new one. Read more...
Deck Engage Cable – Part Number: 946-05124A
Deck Engage Cable
$24.75
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11813377
Manufacturer Part Number
946-05124A
V-Belt – Part Number: 954-04060C
V-Belt
$53.72
On Order
Fix Number
FIX11813755
Manufacturer Part Number
954-04060C
This is a Genuine Manufacturer Approved replacement V-Belt used on Riding Lawn Mowers. This part is made out of Rubber and it is sold individually. This is the Belt that drives the Blades. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance.
Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063
Nut, Flange Lock, 5/16-18, Grf
$4.10
In Stock
Fix Number
FIX9092936
Manufacturer Part Number
712-04063
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD
Replace sheave plate and side skid shoes on snowblower.
Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...
Watch the install video
Bell Blade Support – Part Number: 736-0524B-1
Bell Blade Support
$6.15
In Stock
Fix Number
FIX17016260
Manufacturer Part Number
736-0524B-1
This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made of metal to ensure a long life. If there is visible damage or wear, replace this part.

Installation Instructions

Michael from Lillian, AL
Blade became warped over time, baffle was falling down
In order to change the blade in a push mower you need to use a 2x4 or equivalent to stop the blade from spinning. I bent the blade back previously by heating it up but I think it was causing too much vibration so I got a new blade after hitting stumps over the years. I run some things into the ground. The spark plug is amazing and really high quality. Its a simple change. The drive belt is also a simple change, any 6 in 1 if you remove the screw heads will have the right nut sizes for most mower parts. Always lube up the belt "like two drops" with a little belt oil and it will last longer. I use diesel oil, 3 n 1, or chain saw bar lube oil. The tensioner for the belt is an easy adjustment. This model is also prone to fuel lines being blocked. Just detach the fuel line, blow it out with your mouth, and reattach. Have had it happen twice in 10 years, some people would be pulling spark plugs, diagnosing the engine, etc, its pretty easy, just put some fuel on the carb to see if your getting fuel blockage. Read more...
Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451
Carriage Bolt, 5/16-18 x .75
$4.07
In Stock
Fix Number
FIX10001568
Manufacturer Part Number
710-0451
This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Installation Instructions

Ronald from SPEARFISH, SD
Replace sheave plate and side skid shoes on snowblower.
Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...
Detergent Suction Kit – Part Number: 308452002
Detergent Suction Kit
$5.19
In Stock
Fix Number
FIX9938134
Manufacturer Part Number
308452002
This is an OEM detergent suction kit, also referred to as a chemical injection kit, for a pressure washer. This kit is threaded into the pump assembly and is connected to the chemical siphon tube that is located in a container that holds the cleaner. This kit includes, (1) bronze nozzle, (1) large O-ring, (1) small O-ring, (1) steel ball, (1) spring (5 components total). For this repair, use a pair of pliers to grasp the detergent supply tube and remove the tube from the chemical injector. Remove the old injector with a wrench. To prepare the kit, start by placing the O-rings on the bronzed nozzle, then the steel ball, then the spring. Apply lubricant on the large O-ring and then thread it back into the port.
Fixes these symptoms

Husky Appliance Types

Popular Husky Models

View More
+