Ratings submitted by customers like you who bought this part.
?
$32.97
In Stock
Fix Number:
FIX3502361
Manufacturer #:
297309000
Manufactured by:
Frigidaire
Product Description
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
Works with the following brands:
Frigidaire, Kenmore, Electrolux, Crosley
Works with the following products:
Freezer, Refrigerator
Fixes the following symptoms:
Too warm, Noisy, Won’t start, Fridge too warm
Part# 297309000 replaces these:
216914200, 216934100, 297250000, 5304442624, 7216914200, 7216934100
...
Show more, 7297250000 Show less
Videos For installing this part.
Replacing your FAN MOTOR EVAP 115V
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Annette
September 17, 2022
Problem: freezer fine . Fridge won’t stay cold enough. Set at 37.keeps going to 40 and higher
For model number Ufhb2741pf4
Hello Annette, thank you for your question. We have researched your model and found that the issue is probably with the Evaporator Fan Motor, part number PS1526073. If that does not take care of the issue, then the problem is most likely to be related to the Temperature Sensor, part number PS1765215. If you require assistance to place an order, please contact customer service. We hope that helps!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
The repair is pretty straight forward check video with this site . If your fan is working do not replace it, that was not the problem that was suggested. The thermostat sensor solved the problem.
I removed the panel in back of freezer with Philips screw driver then unplugged the motor from the freezer wire harness and removed the evaporator fan motor bracket with a nutdriver. Then you need to remove the fan motor from the bracket. Next I pulled the old fan blades from the used motor and put them on the new fan motor and attached
... Read more to the mounting bracket and reversed my processes.
Unplug the freezer. Empty the freezer. Remove the shelves by removing the shelf spacers located on the right of each leg of each shelf and sliding them to the right, the left legs will pop out of their pockets, allowing removal. Remove the bottom tray assembly. Remove the 8 screws holding the back panel on (3 top, 2 center, 3 bottom). Y
... Read moreou may have to defrost the bottom of the freezer before you can remove the bottom 3 screws. NOTE: The thermostat is connected to the back panel, so carefully pull it out to expose the evaporator fan. Remove the two bolts holding the evaporator fan motor in. Disconnect the evaporator fan motor wiring harness. Lift out the evaporator fan motor. Gently pull the fan of off its spindle. Install the fan onto the spindle of the new evaporator fan motor. Install the new evaporator fan motor using the two previously removed bolts. Reconnect the wiring harness. Re-install the rear panel. NOTE: Make sure the drain located at the bottom of the freezer is not clogged/frozen - if it is, clear/unclog it, Re-install the bottom tray and the shelves. Plug the freezer back in. Close the freezer and allow it to get cold again, re-stock.
Read less
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX3502361
Manufacturer Part Number: 297309000
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.