Cub Cadet Parts

Start With Your Model Number

Need help finding your model number?

Find Parts Fast

Guaranteed Fit

Repair Videos

Popular Cub Cadet Parts

Element- Air Cleaner

$7.06

In Stock

Add to cart

★★★★★

★★★★★

2 Reviews

Fix Number

FIX9903219

Manufacturer Part Number

17211-ZL8-023

To ensure your engine is protected, it is vital that the air filter is inspected regularly and replaced according to the manufacturer recommendations. This filter helps to prevent dirt and dust from making its way into the carburetor and damaging the engine. If the engine is not functioning as it should, this should be one of the first parts you check. To inspect the filter, you will need to remove the air cleaner cover, and lift the filter out of place to remove.

Installation Instructions

michael from pikeville, KY

none

i watched how i took off the old parts... Read more...

Shear Pin, .25

$3.99

In Stock

Add to cart

Fix Number

FIX9110822

Manufacturer Part Number

738-04124A

Designed for use in MTD, Yard Machine, Troy-Bilt, Yard-Man, and Craftsman machines, this OEM approved Shear Pin fits a variety of models. For full compatibility, please see the "Model Cross Reference List" below. This is a shear pin for your lawn and garden equipment, most commonly your snow blower. It is designed to snap if your auger gets jammed or clogged, to protect your snow blower from further damage. Because this part is meant to snap at a certain point of pressure, it is a commonly replaced part in snow blowers. Consequently, we recommend keeping a spare on hand. This Shear Pin is approximately 1.75" long, and is sold individually.

Watch the install video

Mulching Blade

$31.74

In Stock

Add to cart

Fix Number

FIX9169783

Manufacturer Part Number

942-0741A

This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces along the edges of the blade. If installed correctly this part will keep the grass clipping under the deck longer, and re-cut them. The blade is 21 inches long, and sold individually.

Fixes these symptoms

• Mower blade does not cut
• See more...

Bow Tie Cotter Pin

$3.99

In Stock

Add to cart

Fix Number

FIX9096195

Manufacturer Part Number

714-04040

This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.

Carburetor Gasket

$4.99

In Stock

Add to cart

Fix Number

FIX9899150

Manufacturer Part Number

16228-ZL8-000

This is a carburetor gasket and is sold individually. If your engine is running rough, it could be due to a worn or damaged gasket. The gasket is meant to provide an air tight seal, to help protect the engine. This gasket should be replaced when repairing the carburetor. When removing this part, it is advised to clean the surfaces around the carburetor gasket before installing the new one.

Carburetor

$35.86

In Stock

Add to cart

Fix Number

FIX9119300

Manufacturer Part Number

753-06190

It is an authentic manufacturer-sourced replacement part that i supplied for Craftsman trimmers. The function of a carburetor is to mix the air and the gas into a highly combustible mix before it goes into the engine, over time components may wear out eventually requiring a replacement to ensure peak performance. It is a high-quality metal body carburetor with included rubber primer bulb, please note this assembly is sold individually. When replacing a carburetor it is advised to replace the gaskets as well to ensure the proper seal, keep in mind gaskets are sold separately.

Fixes these symptoms

• Will Not Start
• See more...

Gasket- Carburetor

$4.99

In Stock

Add to cart

Fix Number

FIX9899099

Manufacturer Part Number

16221-883-800

Nut, Flange Lock, 5/16-18, Grf

$4.10

In Stock

Add to cart

Fix Number

FIX9092936

Manufacturer Part Number

712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Watch the install video

Bell Blade Support

$6.15

In Stock

Add to cart

Fix Number

FIX17016260

Manufacturer Part Number

736-0524B-1

This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made of metal to ensure a long life. If there is visible damage or wear, replace this part.

Installation Instructions

Michael from Lillian, AL

Blade became warped over time, baffle was falling down

In order to change the blade in a push mower you need to use a 2x4 or equivalent to stop the blade from spinning. I bent the blade back previously by heating it up but I think it was causing too much vibration so I got a new blade after hitting stumps over the years. I run some things into the ground. The spark plug is amazing and really high quality. Its a simple change. The drive belt is also a simple change, any 6 in 1 if you remove the screw heads will have the right nut sizes for most mower parts. Always lube up the belt "like two drops" with a little belt oil and it will last longer. I use diesel oil, 3 n 1, or chain saw bar lube oil. The tensioner for the belt is an easy adjustment. This model is also prone to fuel lines being blocked. Just detach the fuel line, blow it out with your mouth, and reattach. Have had it happen twice in 10 years, some people would be pulling spark plugs, diagnosing the engine, etc, its pretty easy, just put some fuel on the carb to see if your getting fuel blockage. Read more...

Gasket- Insulator

$7.97

In Stock

Add to cart

Fix Number

FIX9899073

Manufacturer Part Number

16212-ZL8-000

Sold individually, this insulator gasket is sourced directly from the manufacturer and is for small engines. This part acts as a seal between the cylinder housing and the carburetor insulator. This airtight seal is created to ensure contaminants do not make their way to the carburetor. It may become obvious that this part needs to be replaced if the engine keeps stalling or is running rough.

Cub Cadet Appliance Types

• Cub Cadet Chipper Shredder Parts
• Cub Cadet Edger Parts
• Cub Cadet Engine Parts
• Cub Cadet Lawn Mower Parts
• Cub Cadet Lawn Tractor Accessories Parts
• Cub Cadet Lawn Tractor Parts
• Cub Cadet Leaf Blower / Vacuum Parts
• Cub Cadet Log Splitter Parts
• Cub Cadet Snow Blower Parts
• Cub Cadet Sprayer Parts
• Cub Cadet Spreader Parts
• Cub Cadet Tiller Parts
• Cub Cadet Trimmer Parts
• Cub Cadet Pressure Washer Parts

Popular Cub Cadet Models

• A100 ((39A-100-100)) Electric Bed Lift
• A100 ((39A-100-100)(ATT)) Electric Bed Lift
• A104 ((39A-104-100)(ATT)) Front Brush Guard
• A104 ((39A-104-100)(ATT2)) Front Brush Guard Att2
• A104 ((39A-104-100)(ATT3)) Front Brush Guard Att3
• A104 ((39A-104-100)) Front Brush Guard
• A106 ((39A-106-100)(ATT)) Front Receiver Hitch
• A106 ((39A-106-100)(ATT2)) Front Receiver Hitch Att2
• A106 ((39A-106-100)(ATT3)) Front Receiver Hitch Att3
• A106 ((39A-106-100)) Front Receiver Hitch
• A100C (37A-100C129) Work Fun Runner A100c 37a-100c129
• 110 ((190-110-100)(1995)) Attachment & Kit
• 110 ((1969&Since)) Disk Harrow
• 110 ((190-110-100)(1994)) Attachment & Kit
• 110 ((190-110-100)(1996)) Attachment & Kit
• 450 ((190-450-100)) 45-In Snow Thrower
• 417 ((590-417-100)) Loader
• 2150 ((326006&Up,136-242G100,13B-242G100,13A-24)) Tractor
• 800 ((2050050U,2050510U,2050520U)) Garden Tractor
• 800 ((130-512B100)(1990)) Rider