Estate Washer Agitators

★★★★★

★★★★★

20 Reviews

Fix Number

FIX388034

Manufacturer Part Number

80040

Commonly referred to as dog ears, these agitator directional cogs are manufacturer approved replacement parts that come in a package of 4 and are usually used with direct drive washing machines. We recommend replacing all 4 directional cogs at the same time. The agitator directional cogs reach across the gear teeth in one direction and dig into the gear teeth in the other direction to create the needed agitation. This thrusting motion is what tumbles your clothes during the wash cycle. When the teeth on the outer edge are damaged, the cogs will not engage with the upper agitator, making it impossible to agitate as it should. If your machine makes unusual noises, shakes/moves while operating, or will not spin or drain properly, it may be time to replace them. To access this part, simply remove the softener dispenser and then the agitator cap. You will find them attached to the agitator. Each cog is approximately 1 inch long and made of a durable plastic.

★★★★★

★★★★★

10 Reviews

Fix Number

FIX334650

Manufacturer Part Number

285811

This is an OEM agitator repair kit that includes an agitator cam, four directional cogs, a bearing, thrust spacer, inner cap seal, and washer. These parts are found inside the agitator auger near the top. This kit is used when the top portion of the agitator is not moving correctly but the bottom part is. The agitator is subjected to a lot of force during the wash cycle, so it is common for this part to wear over time, especially if you are consistently over-loading your washer. If your model has a softener dispenser, it will need to be removed to perform this repair. Agitator grease is recommended for this repair, but is not included in this kit.

Fix Number

FIX334648

Manufacturer Part Number

285809

This is an authentic OEM agitator cam kit for your washing machine. The kit includes a bearing, the cam holder, and four individual cams. You may need to replace the agitator cam if you find your washer is noisy, it shakes and moves, or it will not agitate. To do this repair we find it easiest to remove the agitator and you will need a 7/16 socket to do this. Once the agitator has been removed from the washer, you can remove the old cam kit from the top portion. The four individual cams are inserted into the cam holder, and the bearing holds them all in place. The assembly can be placed back inside the agitator, and then the agitator installed back inside the washer.

Fix Number

FIX11748113

Manufacturer Part Number

WPW10074580

The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.

★★★★★

★★★★★

1 Review

Fix Number

FIX334562

Manufacturer Part Number

285587

The thrust spacer is a genuine OEM part that is more commonly known as a retainer ring. The spacer is made of white plastic and measures approximately 2.5 inches in diameter. This part is found in between the agitator and the auger in your direct drive washing machine. The space is used to support the auger and secure it on the agitator base. If your washer will not agitate, or is shaking or excessively noisy while running, you may need to replace the ring. Please note that this repair requires dual-action agitator grease, which is not included with this part.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX334622

Manufacturer Part Number

285748

This agitator repair kit comes with a long cam, a thrust spacer and four dogs ears (agitator cogs). This repair kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover). This part has been updated by the manufacture.

★★★★★

★★★★★

1 Review

Fix Number

FIX11742049

Manufacturer Part Number

WP3951744

This agitator comes with the 4 agitator dogs (cogs) and top mover. The cap is NOT included with the agitator.

Fix Number

FIX11742045

Manufacturer Part Number

WP3951632

This is only the base, or the lower half of the agitator.

Fix Number

FIX381197

Manufacturer Part Number

63580

Use this dispenser for your direct drive washing machine.

★★★★★

★★★★★

1 Review

Fix Number

FIX334557

Manufacturer Part Number

285565

This kit does NOT include the fabric softener dispenser (part 8575076A). That must be ordered separately.