Dishwasher Wheels and Rollers

★★★★★

★★★★★

12 Reviews

Fix Number

FIX3406971

Manufacturer Part Number

W10195416

This OEM gray plastic lower dishrack wheel assembly allows the rack to slide in and out of the dishwasher with ease. It measures roughly 3 by 6 inches. If it breaks or becomes damaged it may make sliding in and out feel difficult. This is a normal wear and tear item and will need to be replaced when this happens. It attaches directly to the dishrack and is a quick and easy repair. There are 4 dishrack wheel assemblies in total on your appliance, so this is a good time to inspect all 4, as this part is sold individually. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel.

★★★★★

★★★★★

6 Reviews

Fix Number

FIX11750057

Manufacturer Part Number

WPW10195417

This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in and out easily or preventing you from being able to shut the dishwasher door, inspect the dishrack roller for damage. The assembly includes 2 rollers and the bracket that attaches to the dishrack (parts are not sold separately). This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. For this easy repair, start by removing the lower dishrack from the appliance and set it on the counter. Use a screwdriver to pry off the old roller assembly from the lower tabs. Align the new part on the dishrack by snapping it in place.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX8727387

Manufacturer Part Number

00611475

This part includes one grey plastic wheel with the attachment, designed for your lower dishrack. It allows you to slide the dishrack in and out smoothly. If one of these wheels is missing or damaged, it can make it difficult to slide the rack in and out and can make it impossible to close the dishwasher door. Replacing this part is simple, snap it off the dishrack, and snap the new one into place. Note that each wheel is sold separately, so order accordingly.

★★★★★

★★★★★

1 Review

Fix Number

FIX11756470

Manufacturer Part Number

WPW10571738

This genuine OEM replacement part is a dishrack adjuster and wheel assembly for your dishwasher. This part lets you adjust the height of the top rack, along with the wheels for the rack. Please note that this part is sold individually. If this part has become damaged, you may struggle to adjust the height of the dishrack, or it may not glide in or out smoothly. If this has happened, the broken part should be replaced. No tools are required for this repair, although you may find a small flat blade screwdriver is helpful to release any locking tabs.

Fix Number

FIX8727423

Manufacturer Part Number

00611666

This is a genuine OEM replacement rack roller wheel for the top rack of your dishwasher. If one of your wheels has become damaged, it can make your rack unbalanced and difficult to pull in and out. This can result in dishes not being properly cleaned, or potentially getting damaged. The wheel kit is sold individually and comes with one axle and one roller. Replacing a damaged wheel is an easy repair that does not require any tools, the new part simply clips into place on the rack.

★★★★★

★★★★★

4 Reviews

Fix Number

FIX11726733

Manufacturer Part Number

WD35X21038

The wheels on the lower rack of your dishwasher allow for the rack to slide in and out smoothly. If this is not happening, it may be necessary to replace one or more of the wheels. This kit includes 8 wheels along with 8 axels, both of which are made of white plastic. Replacing a wheel is easy, and just requires a set of pliers. For this repair, you will want to remove the bottom rack from your dishwasher and place it on a solid work surface. Remove the damaged wheels from the rack by unclipping the axel and pulling them off. Insert the new axel into the new wheel pushing firmly until it locks into place. Slide the axel onto the rack, and clip into place. As this kit contains genuine OEM parts, it ensures the parts will be the proper fit for your appliance model.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11745459

Manufacturer Part Number

WP8268743

The wheel mount for the upper rack of your dishwasher ensures that the top rack easily slides along the track when pulling it in and out. If a wheel or the mount becomes damaged, your top rack will not be balanced and will be difficult to use. This can result in dishes not being cleaned properly or even becoming damaged. There are two different wheel mounts per each side of the top rack, located in the middle and back of the rack. This part is sold individually and is interchangeable for which side it is used on. If you need to replace more than one wheel mount, please be sure to order the correct quantity. The mount simply slides onto the rack and then clips into place, but a flat head screwdriver may be required to remove the rail stops in order to take the top rack out of the dishwasher.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11745451

Manufacturer Part Number

WP8268655

If the top rack of your dishwasher is no long sliding in and out smoothly, you may need to replace one of the wheels. This genuine OEM parts assembly includes the wheel, the mount, the axel, and the clip. They are sold individually, and most dishwasher top racks have four wheel-mounts in total. If you need to replace more than one wheel, be sure to add the correct quantity to your cart. Replacing these are an easy repair and does not require any tools, simply pop off the broken wheel mount and snap the new one into place.

★★★★★

★★★★★

1 Review

Fix Number

FIX11750255

Manufacturer Part Number

WPW10204131

This is a genuine OEM replacement rack adjuster for your dishwasher. If this part is damaged, broken, or missing it may cause issues using the top rack properly. To replace this part, first remove the top rack from your dishwasher, by removing the rack stop clips from the ends of the rails. To release the tabs, you can either use your fingers or a flat blade screwdriver to depress the locking tabs. Once the top rack has been removed and placed on a suitable work surface, the defective rack adjuster can be removed, once again using either your fingers or screwdriver to disengage the tabs. The new rack adjuster can then be snapped into place.

Fix Number

FIX11745525

Manufacturer Part Number

WP8270019

If you are unable to smoothly roll the top dish rack of your dishwasher, you may need to replace some of the wheel assemblies. Over time they can become cracked and damaged, and once this happens, they no longer glide smoothly along the rails. If you need a replacement, this is a genuine OEM wheel and mount assembly for the upper rack in your dishwasher. Please note that they are sold individually, so if you need to replace more than one wheel assembly, be sure to add the correct quantity to your cart.